#Iogear cac reader for mac how to
#Iogear cac reader for mac mac os x
#Iogear cac reader for mac install
#Iogear cac reader for mac zip file
#Iogear cac reader for mac update

Push the little yellow folder in the upper right corner of this active window. It will ask you where you want to save the extracted files to, I recommend your desktop. I recommend placing a backslash ( ) at the end of the location on the screen. It will then ask where you want to save the file. You can also use the Extract All Files button (on the left under Folder Tasks, under File, Extract All). It will unzip the contents, (this is the folder you will need when you are doing the steps below).

#Iogear cac reader for mac zip file

Once you have the zip file downloaded, open the zip file (Windows built in zipping program). Windows 10, 8.1/8, or 7 - Save the zip file to a location of your choosing. PROCEED TO STEP 3 ONCE YOU'VE COMPLETED YOUR VERIFICATION OR INSTALLATION

#Iogear cac reader for mac install

To install a driver onto your computer for a CAC reader, you need to first download the correct driver for the hardware you purchased, I have drivers for the most common USB Readers, Keyboard, laptop, & desktop card readers IF you do not see Smart card readers when checking, THEN follow along with the steps below. If that doesn't work, keep reading for other ideas below. Wait a few moments, then plug it back in. Once it is uninstalled, unplug the reader from your computer. It can also show up under unknown devices. Try this first: Go to Device Manager (Instructions are above), scroll down to Smart Card readers, right click the CAC reader that shows up below Smart Card Readers. (For Windows 8.1 users, you'll right click Start). NOTE: If you don't see it, you can also click Start, In the Start Search line type in: devmgmt.msc. If your smart card reader is listed, go to the next step of installing the DoD certificates.

Windows 7 & 8/8.1: Right click Computer, select Properties, Device Manager link (upper left corner of the screen), scroll down to Smart card readers, select the little triangle next to it to open it up. Click System, select Device Manager link (upper left corner of the screen), scroll down to Smart card readers, select the little triangle next to it to open it up. Windows 10: Right click the Windows logo (lower left corner of your screen). Plug your CAC reader into your computer before proceeding To Verify whether your driver did or did not install, follow these instructions: Most of the time, the New hardware wizard will install the CAC reader automatically, negating the need for you to install the driver manually. Plug in your CAC reader NOW NOTE: Please check and make sure your CAC reader installed BEFORE you attempt to follow the driver installation instructions below. Furthermore, installing the wrong IOGEAR drivers can make these problems even worse. Using outdated or corrupt IOGEAR GSR202 - USB Smart Card Access Reader drivers can cause system errors, crashes, and cause your computer or hardware to fail.

#Iogear cac reader for mac update

Alternate CCID Firmware update download for SCR-331. NOTE: If you computer fails to recognize the CAC reader driver, you may need to try a different computer to do the update. Does not read your CAC when using your Mac.

Updating the Driver - for IOGear GSR-202 reader. The IOGEAR GSR202 is a TAA compliant USB Common Access Card Reader for military, government and even private sector workers who need everyday access to. Use this link to contact the help desk for your branch of the military. Middleware authentication troubleshooting will be required with your branch of the military. IOGEAR can only provide support and troubleshooting for the CAC Reader itself.

#Iogear cac reader for mac how to

If you get this one there are step-by-step instructions on AKO on how to set the reader up. It was about $20 I believe and I had to download a couple drivers but it works just fine with my Mac.

Iogear Cac Reader Driver For Windows 10īest SmartCard/CAC reader for a Mac? I have the Iogear card reader that is available at the PX.

Please go to the website below to submit any further problems.

#Iogear cac reader for mac mac os x

In general, it depends on which version of Mac OS X is being using. If it is 10.6.6 it should work fine, but if you have a 144 CAC, they will need the CAC-NG file.If you are using a Oberthur ID One 128 v5.5 Dual CAC, there is no current fix from the Mac OS people. Either a Gemalto TOP DL GX4 144 or Oberthur ID One 128 v5.5 Dual.

There are two type of cards and you can tell it from the back of the card.

Please refer the following link to the customers. It gives step by step procedure to resolve the certificate issue.

Just plug the Smart Card Reader to the USB port on the computer, it will be detected by the computer and the driver will be installed automatically. If Windows does not locate the appropriate driver, please go to the IOGEAR website to download the driver.

This device (GSR201) is plug and play for most of the fully installed Windows OS, or Mac OS 10.4 or later.